Utilize este identificador para referenciar este registo: http://hdl.handle.net/10400.1/6616
Título: Interface properties and capacitance-voltage behaviour of diamond devices prepared by microwave-assisted CVD
Autor: Rodrigues, A. M.
Gomes, Henrique L.
Rees, J. A.
Pereira, L.
Pereira, E.
Data: 1999
Editora: Wiley
Resumo: Free standing diamond films were used to study the effect of diamond surface morphology and microstructure on the electrical properties of Schottky barrier diodes. By using free standing films both the rough top diamond surface and the very smooth bottom surface are available for post-metal deposition. Rectifying electrical contacts were then established either with the smooth or the rough surface. The estimate of doping density from the capacitance-voltage plots shows that the smooth surface has a lower doping density when compared with the top layers of the same film. The results also show that surface roughness does not contribute significantly to the frequency dispersion of the small signal capacitance. The electrical properties of an abrupt asymmetric n(+)(silicon)-p(diamond) junction have also been measured. The I-V curves exhibit at low temperatures a plateau near zero bias, and show inversion of rectification. Capacitance-voltage characteristics show a capacitance minimum with forward bias, which is dependent on the environment conditions. It is proposed that this anomalous effect arises from high level injection of minority carriers into the bulk.
Peer review: yes
URI: http://hdl.handle.net/10400.1/6616
DOI: https://dx.doi.org/ 10.1002/(SICI)1521-396X(199907)174:1<165::AID-PSSA165>3.0.CO;2-L
ISSN: 0031-8965
Aparece nas colecções:FCT2-Artigos (em revistas ou actas indexadas)



FacebookTwitterDeliciousLinkedInDiggGoogle BookmarksMySpace
Formato BibTex MendeleyEndnote Degois 

Todos os registos no repositório estão protegidos por leis de copyright, com todos os direitos reservados.