Loading...
Research Project
Untitled
Funder
Authors
Publications
The relevance of structural features of cellulose and its interactions to dissolution, regeneration, gelation and plasticization phenomena
Publication . Lindman, Bjorn; Medronho, Bruno; Alves, Luis; Costa, Carolina; Edlund, Hakan; Norgren, Magnus
Cellulose is the most abundant polymer and a very important renewable resource. Since cellulose cannot be shaped by melting, a major route for its use for novel materials, new chemical compounds and renewable energy must go via the solution state. Investigations during several decades have led to the identification of several solvents of notably different character. The mechanisms of dissolution in terms of intermolecular interactions have been discussed from early work but, even on fundamental aspects, conflicting and opposite views appear. In view of this, strategies for developing new solvent systems for various applications have remained obscure. There is for example a strong need for using forest products for higher value materials and for environmental and cost reasons to use water-based solvents. Several new water-based solvents have been developed recently but there is no consensus regarding the underlying mechanisms. Here we wish to address the most important mechanisms described in the literature and confront them with experimental observations. A broadened view is helpful for improving the current picture and thus cellulose derivatives and phenomena such as fiber dissolution, swelling, regeneration, plasticization and dispersion are considered. In addition to the matter of hydrogen bonding versus hydrophobic interactions, the role of ionization as well as some applications of new knowledge gained are highlighted.
Levulinic acid-based “green” solvents for lignocellulose fractionation: on the superior extraction yield and selectivity toward lignin
Publication . Melro, Elodie; Riddell, Alexander; Bernin, Diana; Rosa Da Costa, Ana; Valente, Artur J. M.; Antunes, Filipe E.; Romano, Anabela; Norgren, Magnus; Medronho, Bruno
The high potential use of lignin in novel biomaterialsand chemicalsrepresents an important opportunity for the valorization of the mostabundant natural resource of aromatic molecules. From an environmentalperspective, it is highly desirable replacing the hazardous methodscurrently used to extract lignin from lignocellulosic biomass anddevelop more sustainable and environmentally friendly approaches.Therefore, in this work, levulinic acid (a "green" solventobtained from biomass) was successfully used, for the first time,to selectively extract high-quality lignin from pine wood sawdustresidues at 200 degrees C for 6 h (at atmospheric pressure). Moreover,the addition of catalytic concentrations of inorganic acids (i.e.,H2SO4 or HCl) was found to substantially reducethe temperature and reaction times needed (i.e., 140 degrees C, 2 h)for complete lignin extraction without compromising its purity. NMRdata suggests that condensed OH structures and acidic groups are presentin the lignin following extraction. Levulinic acid can be easily recycledand efficiently reused several times without affecting its performance.Furthermore, excellent solvent reusability and performance of extractionof other wood residues has been successfully demonstrated, thus makingthe developed levulinic acid-based procedure highly appealing andpromising to replace the traditional less sustainable methodologies.
New deep eutectic solvent assisted extraction of highly pure lignin from maritime pine sawdust (Pinus pinaster Ait.)
Publication . Fernandes, Catarina; Melro, Elodie; Magalhaes, Solange; Alves, Luis; Craveiro, Rita; Filipe, Alexandra; Valente, Artur J. M.; Martins, Gabriela; Antunes, Filipe E.; Romano, Anabela; Medronho, Bruno
Lignocellulosic biomass is a renewable and sustainable feedstock, mainly composed of cellulose, hemicellulose, and lignin. Lignin, as the most abundant natural aromatic polymer occurring on Earth, has great potential to produce value-added products. However, the isolation of highly pure lignin from biomass requires the use of efficient methods during lignocellulose fractionation. Therefore, in this work, novel acidic deep eutectic solvents (DESs) were prepared, characterized and screened for lignin extraction from maritime pine wood (Pinus pinaster Ait.) sawdust. The use of cosolvents and the development of new DES were also evaluated regarding their extraction and selectivity performance. The results show that an 1 h extraction process at 175 ?C, using a novel DES composed of lactic acid, tartaric acid and choline chloride, named Lact:Tart:ChCl, in a molar ratio of 4:1:1, allows the recovery of 95 wt% of the total lignin present in pine biomass with a purity of 89 wt%. Such superior extraction of lignin with remarkable purity using a ?green? solvent system makes this process highly appealing for future large-scale applications. ? 2021 Elsevier B.V. All rights reserved.
Microrheology of novel cellulose stabilized oil-in-water emulsions
Publication . Medronho, Bruno; Filipe, A.; Costa, C.; Romano, Anabela; Lindman, B.; Edlund, H.; Norgren, M.
Diffusing wave spectroscopy (DWS) is a powerful optical technique suitable to investigate turbid samples in a nondestructive and reproducible way, providing information on the static and dynamic properties of the system. This includes the relative displacement of emulsion droplets over time and changes in the viscoelastic properties. Here, novel and promising cellulose-based oil-in-water (O/W) emulsions were prepared and studied, for the first time, by DWS. Cellulose plays the role of a novel eco-friendly emulsifying agent. The hydrolysis time of cellulose was observed to affect the average size of the emulsion droplets and their stability; the longer the hydrolysis time, the more dispersed and stable the emulsions were found to be. Additionally, a good complementarity between the microrheology (DWS) and macrorheology (mechanical rheometer) data was found. Our work suggests that DWS is a highly attractive method to investigate the stability, aging and microrheology properties of cellulose-based emulsions, providing valuable insights on their microstructure. This technique is thus highly appealing for the characterization and design of novel emulsion formulations. (C) 2018 The Authors. Published by Elsevier Inc.
Revisiting lignin: a tour through its structural features, characterization methods and applications
Publication . Melro, Elodie; Filipe, Alexandra; Sousa, Dora; Medronho, Bruno; Romano, Anabela
Lignin is a complex organic polymer found in the plant cell wall with important biological functions, such as water transport, mechanical support, and resistance to various stresses. It is considered the second most abundant biopolymer on earth and the largest natural source of aromatics. Despite being annually co-produced in massive amounts, during cellulose fragmentation in the pulp industry and ethanol biorefinery, it is clearly undervalued; most of it is discarded or burned as fuel for energy production and, so far, only ca. 1-2% of lignin has been utilized as a high-value product. This underuse makes lignin the future resource of choice to produce green fuels and a wide range of added-value biomaterials and chemicals, which can contribute to the transition to more sustainable industries. However, its great variability between plant families combined with its complex and chemically inert structure is challenging researchers who seek for strategies regarding its valorization. With this scope, several different approaches have emerged regarding the development of better and efficient isolation methods, purification and characterization techniques, and improved methodologies for lignin chemical modification and blending with other compounds. These improvements represent important opportunities for the creation of value-added lignin-based biopolymers and materials and some have already shown potential to be scaled up. All these aspects are pedagogically introduced and discussed in this review.
Organizational Units
Description
Keywords
Contributors
Funders
Funding agency
Fundação para a Ciência e a Tecnologia
Funding programme
3599-PPCDT
Funding Award Number
PTDC/AGR-TEC/4814/2014