Browsing by Author "Valente, Artur J. M."
Now showing 1 - 9 of 9
Results Per Page
Sort Options
- Enhancing lignin dissolution and extraction: the effect of surfactantsPublication . Melro, Elodie; Valente, Artur J. M.; Antunes, Filipe E.; Romano, Anabela; Medronho, BrunoThe dissolution and extraction of lignin from biomass represents a great challenge due to the complex structure of this natural phenolic biopolymer. In this work, several surfactants (i.e., non-ionic, anionic, and cationic) were used as additives to enhance the dissolution efficiency of model lignin (kraft) and to boost lignin extraction from pine sawdust residues. To the best of our knowledge, cationic surfactants have never been systematically used for lignin dissolution. It was found that ca. 20 wt.% of kraft lignin is completely solubilized using 1 mol L-1 octyltrimethylammonium bromide aqueous solution. A remarkable dissolution efficiency was also obtained using 0.5 mol L-1 polysorbate 20. Furthermore, all surfactants used increased the lignin extraction with formic acid, even at low concentrations, such as 0.01 and 0.1 mol L-1. Higher concentrations of cationic surfactants improve the extraction yield but the purity of extracted lignin decreases.
- From a new cellulose solvent to the cyclodextrin induced formation of hydrogelsPublication . Medronho, Bruno; Duarte, Hugo; Magalhaes, Solange; Alves, Luis; Valente, Artur J. M.; Romano, AnabelaA new efficient solvent for cellulose dissolution was developed based on the mixture of aqueous tetrabutylammonium hydroxide, TBAH(aq) and an organic co-solvent, dimethylsulfoxide (DMSO). Clear cellulose solutions were readily obtained at mild conditions in a few minutes. The viscoeleastic properties of the dopes formed are found to be dependent on the cellulose content and TBAH(aq)/DMSO ratio. Additionally, stiff hydrogels are formed when adding beta-cyclodextrin (beta-CD) to the cellulose dopes. The formation of a host-guest complex between the beta-CD and the tetrabutylammonium cations (TBA(+)), which presumably destabilizes the cellulose solution state triggering the hydrogel formation, is suggested as mechanism. The robust hydrogels formed have been characterized regarding their viscoelasticity, microscopic morphology and release properties. The kinetics and released amount of the TBA(+) from the cellulose gel matrixes are found to be strongly dependent on the balance between average pore diameter, surface area and free volume of the hydrogels. (C) 2017 Elsevier B.V. All rights reserved.
- Levulinic acid-based “green” solvents for lignocellulose fractionation: on the superior extraction yield and selectivity toward ligninPublication . Melro, Elodie; Riddell, Alexander; Bernin, Diana; Rosa Da Costa, Ana; Valente, Artur J. M.; Antunes, Filipe E.; Romano, Anabela; Norgren, Magnus; Medronho, BrunoThe high potential use of lignin in novel biomaterialsand chemicalsrepresents an important opportunity for the valorization of the mostabundant natural resource of aromatic molecules. From an environmentalperspective, it is highly desirable replacing the hazardous methodscurrently used to extract lignin from lignocellulosic biomass anddevelop more sustainable and environmentally friendly approaches.Therefore, in this work, levulinic acid (a "green" solventobtained from biomass) was successfully used, for the first time,to selectively extract high-quality lignin from pine wood sawdustresidues at 200 degrees C for 6 h (at atmospheric pressure). Moreover,the addition of catalytic concentrations of inorganic acids (i.e.,H2SO4 or HCl) was found to substantially reducethe temperature and reaction times needed (i.e., 140 degrees C, 2 h)for complete lignin extraction without compromising its purity. NMRdata suggests that condensed OH structures and acidic groups are presentin the lignin following extraction. Levulinic acid can be easily recycledand efficiently reused several times without affecting its performance.Furthermore, excellent solvent reusability and performance of extractionof other wood residues has been successfully demonstrated, thus makingthe developed levulinic acid-based procedure highly appealing andpromising to replace the traditional less sustainable methodologies.
- Levulinic acid: a novel sustainable solvent for lignin dissolutionPublication . Melro, Elodie; Filipe, Alexandra; Valente, Artur J. M.; Antunes, Filipe E.; Romano, Anabela; Norgren, Magnus; Medronho, BrunoLignin is a natural, renewable resource with potential to be used in biomaterials. Due to its complex structure, its efficient dissolution is still challenging, which hinders its applicability at large scale. This challenge become harder considering the current need of sustainable and environmentally friendly solvents. To the best of our knowledge, this work reports for the first time the dissolution of kraft lignin in levulinic acid, a "green" solvent, and compares its efficiency with common carboxylic acids and sulfuric acid. It has been found that levulinic acid has a high capacity to dissolve kraft lignin at room temperature (40 wt% solubility), and it efficiency is not compromised when diluting the acid with water (up to 40 wt% water content). the Kamlet-Taft pi* parameter of the different acidic solvents was estimated and found to correlate well with their solubility performance. Lignins previously dissolved in levulinic and formic acids were selected to be regenerated and minor differences were found in thermal stability and morphological structure, when compared to native kraft lignin. However, an increase in the content of the carbonyl groups in the regenerated lignin material was observed. (C) 2020 Elsevier B.V. All rights reserved.
- Lignin-furanic rigid foams: Enhanced methylene blue removal capacity, recyclability, and flame retardancyPublication . Duarte, Hugo; Brás, João; Saoudi Hassani, El Mokhtar; Aliaño González, María José; Magalhães, Solange; Alves, Luís; Valente, Artur J. M.; Eivazi, Alireza; Norgren, Magnus; Romano, Anabela; Medronho, BrunoWorldwide, populations face issues related to water and energy consumption. Water scarcity has intensified globally, particularly in arid and semiarid regions. Projections indicate that by 2030, global water demand will rise by 50%, leading to critical shortages, further intensified by the impacts of climate change. Moreover, wastewater treatment needs further development, given the presence of persistent organic pollutants, such as dyes and pharmaceuticals. In addition, the continuous increase in energy demand and rising prices directly impact households and businesses, highlighting the importance of energy savings through effective building insulation. In this regard, tannin-furanic foams are recognized as promising sustainable foams due to their fire resistance, low thermal conductivity, and high water and chemical stability. In this study, tannin and lignin rigid foams were explored not only for their traditional applications but also as versatile materials suitable for wastewater treatment. Furthermore, a systematic approach demonstrates the complete replacement of the tannin-furan foam phenol source with two lignins that mainly differ in molecular weight and pH, as well as how these parameters affect the rigid foam structure and methylene blue (MB) removal capacity. Alkali-lignin-based foams exhibited notable MB adsorption capacity (220 mg g−1), with kinetic and equilibrium data analysis suggesting a multilayer adsorption process. The prepared foams demonstrated the ability to be recycled for at least five adsorption-desorption cycles and exhibited effective flame retardant properties. When exposed to a butane flame for 5 min, the foams did not release smoke or ignite, nor did they contribute to flame propagation, with the red glow dissipating only 20 s after flame exposure.
- New deep eutectic solvent assisted extraction of highly pure lignin from maritime pine sawdust (Pinus pinaster Ait.)Publication . Fernandes, Catarina; Melro, Elodie; Magalhaes, Solange; Alves, Luis; Craveiro, Rita; Filipe, Alexandra; Valente, Artur J. M.; Martins, Gabriela; Antunes, Filipe E.; Romano, Anabela; Medronho, BrunoLignocellulosic biomass is a renewable and sustainable feedstock, mainly composed of cellulose, hemicellulose, and lignin. Lignin, as the most abundant natural aromatic polymer occurring on Earth, has great potential to produce value-added products. However, the isolation of highly pure lignin from biomass requires the use of efficient methods during lignocellulose fractionation. Therefore, in this work, novel acidic deep eutectic solvents (DESs) were prepared, characterized and screened for lignin extraction from maritime pine wood (Pinus pinaster Ait.) sawdust. The use of cosolvents and the development of new DES were also evaluated regarding their extraction and selectivity performance. The results show that an 1 h extraction process at 175 ?C, using a novel DES composed of lactic acid, tartaric acid and choline chloride, named Lact:Tart:ChCl, in a molar ratio of 4:1:1, allows the recovery of 95 wt% of the total lignin present in pine biomass with a purity of 89 wt%. Such superior extraction of lignin with remarkable purity using a ?green? solvent system makes this process highly appealing for future large-scale applications. ? 2021 Elsevier B.V. All rights reserved.
- On the development of Phenol-Formaldehyde resins using a new type of lignin extracted from pine wood with a Levulinic-Acid based solventPublication . Melro, Elodie; Antunes, Filipe E.; Valente, Artur J. M.; Duarte, Hugo; Romano, A.; Medronho, BrunoResole resins have many applications, especially for foam production. However, the use of phenol, a key ingredient in resoles, has serious environmental and economic disadvantages. In this work, lignin extracted from pine wood using a “green” solvent, levulinic acid, was used to partially replace the non-sustainable phenol. The physicochemical properties of this novel resin were compared with resins composed of different types of commercial lignins. All resins were optimized to keep their free formaldehyde content below 1 wt%, by carefully adjusting the pH of the mixture. Substitution of phenol with lignin generally increases the viscosity of the resins, which is further increased with the lignin mass fraction. The addition of lignin decreases the kinetics of gelification of the resin. The type and amount of lignin also affect the thermal stability of the resins. It was possible to obtain resins with higher thermal stability than the standard phenol-formaldehyde resins without lignin. This work provides new insights regarding the development of lignin-based resoles as a very promising sustainable alternative to petrol-based resins.
- Poly(butylene succinate)-based composites with technical and extracted lignins from wood residuesPublication . Melro, Elodie; Duarte, Hugo; Eivazi, Alireza; Costa, Carolina; Faleiro, Maria Leonor; Rosa Da Costa, Ana; Antunes, Filipe E.; Valente, Artur J. M.; Romano, Anabela; Norgren, Magnus; Medronho, BrunoPoly(butylene succinate) (PBS) has been drawing attention as a reliable biodegradable and sustainable alternative to synthetic petroleum-based polymers. In this study, PBS-lignin composites were developed using a recently extracted lignin (LA-lignin) from pine wood residues employing an innovative sustainable approach. These composites were systematically compared with PBS-based composites formed with commonly used technical lignins. The molecular weight of the lignins was evaluated, along with various structural and performance-related properties. The LA-lignin/PBS composites display a remarkably low water solubility (ca. < 2%), water uptake (ca. 100 degrees). Moreover, the rigidity and thermal stability of the LA-lignin-PBS composites were higher than those of the systems formed with technical lignins. Although all composites studied present remarkable antioxidant features, the novel LA-lignin-PBS systems stand out in terms of antiadhesion activity against both Gram-positive and Gram-negative bacteria. Overall, the systematic analysis performed in this work regarding the impact of various lignins on the formed PBS composites enables a better understanding of the essential structural and compositional lignin features for achieving biobased materials with superior properties.
- The role of cyclodextrin-tetrabutylammonium complexation on the cellulose dissolutionPublication . Medronho, Bruno; Duarte, Hugo; Alves, Luis; Antunes, Filipe E.; Romano, Anabela; Valente, Artur J. M.Cellulose dissolution is a challenging process which is typically very sensitive to the solvent characteristics such as pH, temperature or presence of additives. Regarding the later aspect, it is here reported the interaction between cc-cyclodextrin (alpha-CD) and beta-cyclodextrin (beta-CD) with the tetrabutylammonium cation (TBA(+)) by H-1 NMR titration experiments. The analysis by the continuous variation method suggests the formation of 1:1 CD:TBA+ complexes. However, the computed apparent association constants reveal that the interaction of MA+ with the beta-CD (K=1580 M-1) is unexpectedly stronger than with alpha-CD (K=106 M-1). In both CD cases, the formation of CD:TBA(+) complexes decrease the dissolution efficiency of the solvent and this has been rationalized as an effective decrease in the concentration of the amphiphilic cation and concomitant weakening of the hydrophobic interactions in solution influencing the overall performance of the solvent. Additionally, the data also supports the fact that amphiphilic species in solution are beneficial for the enhancement of cellulose solubility. (C) 2015 Elsevier Ltd. All rights reserved.