Loading...
Research Project
CICECO-Aveiro Institute of Materials
Funder
Authors
Publications
A glance at novel ionanofluids incorporating silk-derived carbon dots
Publication . Duarte, Tiago A. G.; Pereira, Rui F. P.; Medronho, Bruno; Maltseva, Elizaveta S.; Krivoshapkina, Elena F.; Varela-Dopico, Alejandro; Taboada, Pablo; Fu, Lianshe; Ferreira, Rute A. S.; de Zea Bermudez, Verónica
One of the hallmarks of the current efforts in the field of thermal energy is heat transfer enhancement. Ionanofluids (INFs), a combination of nanomaterials and ionic liquids (ILs), are an appealing category of thermal fluids. In this work, we introduce sustainable INFs composed of carbon dots derived from Bombyx mori silk fibroin (SF) dispersed in a mixture of 1-butyl-3-methylimidazolium chloride (IL1) and 1-(4-sulfobutyl)-3-methylimidazolium triflate (IL2). The syntheses were performed at mild conditions, with reaction times of 3, 4, and 5 h, and without purification steps. The INFs display room-temperature emission in the visible spectral range with quantum yield values up to 0.09 and are essentially viscous fluids (G '' > G '). A marked shear thinning behavior is observed at high shear rates, particularly for the systems SFIL1IL2-3h and SFIL1IL2-4h. The INFs demonstrate relatively high heat capacity and thermal conductivity values in comparison to state-of-the-art INFs. Under suitable illumination conditions, the INFs can convert light into heat in an efficient manner, with photothermal conversion efficiencies of up to 28%, similar to other reported INFs. SFIL1IL2-5h exhibits remarkable stability over time within the range of working temperatures. This work paves the way for the development of new thermal fluids for enhanced heat transfer technologies using sustainable synthesis routes and natural raw precursor materials.
Potential of Coccolithophore microalgae as fillers in starch-based films for active and sustainable food packaging
Publication . Moreira, Ana S. P.; Gonçalves, Joana; Sousa, Francisco; Maia, Inês Beatriz; Pereira, Hugo; Silva, Joana; Coimbra, Manuel A.; Ferreira, Paula; Nunes, Cláudia
Coccolithophore microalgae, such as Emiliania huxleyi (EHUX) and Chrysotila pseudoroscoffensis (CP), are composed of calcium carbonate (CaCO3) and contain bioactive compounds that can be explored to produce sustainable food packaging. In this study, for the first time, these microalgae were incorporated as fillers in starch-based films, envisioning the development of biodegradable and bioactive materials for food packaging applications. The films were obtained by solvent casting using different proportions of the filler (2.5, 5, 10, and 20%, w/w). For comparison, commercial CaCO3, used as filler in the plastic industry, was also tested. The incorporation of CaCO3 and microalgae (EHUX or CP) made the films significantly less rigid, decreasing Young’s modulus up to 4.7-fold. Moreover, the incorporation of microalgae hydrophobic compounds as lipids turned the surface hydrophobic (water contact angles > 90°). Contrary to what was observed with commercial CaCO3, the films prepared with microalgae exhibited antioxidant activity, increasing from 0.9% (control) up to 60.4% (EHUX 20%) of ABTS radical inhibition. Overall, the introduction of microalgae biomass improved hydrophobicity and antioxidant capacity of starch-based films. These findings should be considered for further research using coccolithophores to produce active and sustainable food packaging material.
Synthesis, structure and antileishmanial evaluation of endoperoxide–pyrazole hybrids
Publication . Amado, Patrícia S. M.; Costa, Inês C. C.; Paixão, José A.; Mendes, Ricardo F.; Cortes, Sofia; Cristiano, Maria L.
Leishmaniases are among the most impacting neglected tropical diseases. In attempts to repurpose antimalarial drugs or candidates, it was found that selected 1,2,4-trioxanes, 1,2,4,5-tetraoxanes, and pyrazole-containing chemotypes demonstrated activity against Leishmania parasites. This study reports the synthesis and structure of trioxolane–pyrazole (OZ1, OZ2) and tetraoxane–pyrazole (T1, T2) hybrids obtained from the reaction of 3(5)-aminopyrazole with endoperoxide-containing building blocks. Interestingly, only the endocyclic amine of 3(5)-aminopyrazole was found to act as nucleophile for amide coupling. However, the fate of the reaction was influenced by prototropic tautomerism of the pyrazole heterocycle, yielding 3- and 5-aminopyrazole containing hybrids which were characterized by different techniques, including X-ray crystallography. The compounds were evaluated for in vitro antileishmanial activity against promastigotes of L. tropica and L. infantum, and for cytotoxicity against THP-1 cells. Selected compounds were also evaluated against intramacrophage amastigote forms of L. infantum. Trioxolane–pyrazole hybrids OZ1 and OZ2 exhibited some activity against Leishmania promastigotes, while tetraoxane–pyrazole hybrids proved inactive, most likely due to solubility issues. Eight salt forms, specifically tosylate, mesylate, and hydrochloride salts, were then prepared to improve the solubility of the corresponding peroxide hybrids and were uniformly tested. Biological evaluations in promastigotes showed that the compound OZ1•HCl was the most active against both strains of Leishmania. Such finding was corroborated by the results obtained in assessments of the L. infantum amastigote susceptibility. It is noteworthy that the salt forms of the endoperoxide–pyrazole hybrids displayed a broader spectrum of action, showing activity in both strains of Leishmania. Our preliminary biological findings encourage further optimization of peroxide–pyrazole hybrids to identify a promising antileishmanial lead.
A Molybdenum(VI) Complex of 5-(2-pyridyl-1-oxide)tetrazole: synthesis, structure, and transformation into a MoO3-Based hybrid catalyst for the epoxidation of Bio-Olefins
Publication . Nunes, Martinique S.; Gomes, Diana M.; Gomes, Ana C.; Neves, Patrícia; Mendes, Ricardo F.; Paz, Filipe A. Almeida; Lopes, Andre D.; Pillinger, Martyn; Valente, Anabela A.; Gonçalves, Isabel S.
The discovery of heterogeneous catalysts synthesized in easy, sustainable ways for the
valorization of olefins derived from renewable biomass is attractive from environmental, sustainability, and economic viewpoints. Here, an organic–inorganic hybrid catalyst formulated as
[MoO3
(Hpto)]·H2O (2), where Hpto = 5-(2-pyridyl-1-oxide)tetrazole, was prepared by a hydrolysis–
condensation reaction of the complex [MoO2Cl2
(Hpto)]·THF (1). The characterization of 1 and 2
by FT-IR and Raman spectroscopies, as well as 13C solid-state NMR, suggests that the bidentate
N,O-coordination of Hpto in 1 (forming a six-membered chelate ring, confirmed by X-ray crystallography) is maintained in 2, with the ligand coordinated to a molybdenum oxide substructure.
Catalytic studies suggested that 2 is a rare case of a molybdenum oxide/organic hybrid that acts as a
stable solid catalyst for olefin epoxidation with tert-butyl hydroperoxide. The catalyst was effective
for converting biobased olefins, namely fatty acid methyl esters (methyl oleate, methyl linoleate,
methyl linolenate, and methyl ricinoleate) and the terpene limonene, leading predominantly to the
corresponding epoxide products with yields in the range of 85–100% after 24 h at 70 ◦C. The versatility
of catalyst 2 was shown by its effectiveness for the oxidation of sulfides into sulfoxides and sulfones,
at 35 ◦C (quantitative yield of sulfoxide plus sulfone, at 24 h; sulfone yields in the range of 77–86%).
To the best of our knowledge, 2 is the first molybdenum catalyst reported for methyl linolenate
epoxidation, and the first of the family [MoO3
(L)x] studied for methyl ricinoleate epoxidation.
Inclusion complexes of cucurbit[n]urils (n = 7, 8) with η5 -cyclopentadienyl methyl tricarbonyl molybdenum(II) and their use in epoxidation catalysis
Publication . Neves, Patrícia; Gomes, Ana C.; Monteiro, Rodrigo P.; Santos, Mirela J.; Valente, Anabela A.; D. Lopes, André; Gonçalves, Isabel S.; Pillinger, Martyn
There are very few known examples of supramolecular compounds comprising molybdenum species hosted inside the portals/cavities of cucurbit[n]urils (CBn). In this work, CB7 and CB8 macrocycles have been studied as hosts for the carbonyl complex [CpMo(CO)(3)Me] (1) (Cp = eta(5)-C5H5). Compounds were isolated in the solid state and characterized as genuine 1:1 inclusion complexes (1@CBn) by elemental and thermogravimetric analyses, powder X-ray diffraction, scanning electron microscopy, C-13{H-1} cross-polarization magic-angle spinning NMR, FT-IR, Raman, and diffuse reflectance UV-Vis spectroscopies. The host-guest structures can act as supramolecular precatalysts for olefin epoxidation. Based on the model reaction of cis-cyclooctene with hydroperoxide oxidants (tert-butylhydroperoxide or hydrogen peroxide), the structural features of 1@CBn as well as the operating conditions influence the catalytic process. The metal species in 1@CBn undergo oxidative decarbonylation in situ, giving oxidized metal species that are catalytically active for olefin epoxidation. The type of oxidant and solvent influences the catalytic activity and stability. 1@CB8 was more stable than 1@CB7 with regard to catalyst recycling and reuse. Based on the substrate scope investigation, for relatively large olefins, such as the fatty acid methyl ester methyl oleate, the size of the macrocyclic host may be a determining factor for catalytic activity.
Organizational Units
Description
Keywords
Contributors
Funders
Funding agency
Fundação para a Ciência e a Tecnologia
Funding programme
6817 - DCRRNI ID
Funding Award Number
UIDP/50011/2020