Browsing by Author "Paz, Filipe A. Almeida"
Now showing 1 - 4 of 4
Results Per Page
Sort Options
- A 5-(2-Pyridyl) tetrazolate complex of Molybdenum(VI), its structure, and transformation to a Molybdenum Oxide-Based Hybrid Heterogeneous Catalyst for the Epoxidation of OlefinsPublication . Nunes, Martinique S.; Gomes, Diana M.; Gomes, Ana C.; Neves, Patrícia; Mendes, Ricardo F.; Paz, Filipe A. Almeida; Lopes, A. D.; Valente, Anabela A.; Gonçalves, Isabel S.; Pillinger, MartynThere is a considerable practical interest in discovering new ways to obtain organomolybdenum heterogeneous catalysts for olefin epoxidation that are easier to recover and reuse and display enhanced productivity. In this study, the complex salt (H2pytz)[MoO2Cl2 (pytz)] (1) (Hpytz = 5-(2-pyridyl)tetrazole) has been prepared, structurally characterized, and employed as a precursor for the hydrolysis-based synthesis of a microcrystalline molybdenum oxide/organic hybrid material formulated as [MoO3 (Hpytz)] (2). In addition to single-crystal X-ray diffraction (for 1), compounds 1 and 2 were characterized by FT-IR and Raman spectroscopies, solid-state 13C{1H} cross-polarization (CP) magic-angle spinning (MAS) NMR, and scanning electron microscopy (SEM). Compounds 1 and 2 were evaluated as olefin epoxidation catalysts using the model reaction of cis-cyclooctene (Cy8) with tert-butyl hydroperoxide (TBHP), at 70 ◦C, which gave 100% epoxide selectivity up to 100% conversion. While 1 behaved as a homogeneous catalyst, hybrid 2 behaved as a heterogeneous catalyst and could be recovered for recycling without showing structural degradation or loss of catalytic performance over consecutive reaction cycles. The substrate scope was broadened to monoterpene DL-limonene (Lim) and biobased unsaturated fatty acid methyl esters, methyl oleate (MeOle), and methyl linoleate (MeLin), which gave predominantly epoxide products.
- Bis(pyrazolyl)methanetetracarbonyl-molybdenum(0) as precursor to a molybdenum(VI) catalyst for olefin epoxidationPublication . Figueiredo, Sónia; Gomes, Ana C.; Fernandes, José A.; Paz, Filipe A. Almeida; Lopes, Andre D.; Lourenço, J. P.; Pillinger, Martyn; Gonçalves, Isabel S.Bis(pyrazolyl)methanetetracarbonyl-molybdenum(0), cis-[Mo(CO)4(BPM)] (1), was prepared from Mo(CO)6 and the ligand bis(pyrazolyl)methane (BPM), and examined as a catalyst precursor for the epoxidation of olefins using tert-butylhydroperoxide (TBHP) as oxidant. Catalytic activities followed the sequence 1-octene < trans-2-octene < a-pinene < (R)-(þ)-limonene < cis-cyclooctene, and, with the exception of a-pinene and limonene, the corresponding epoxide was always the only reaction product. Turnover frequencies for the epoxidation of cyclooctene were 580 mol molMo 1 h 1 at 55 C and 1175 mol molMo 1 h 1 at 75 C, which compare favourably with those found for other molybdenum carbonyl complexes used as catalyst precursors for the same reaction under similar conditions. Catalytic activities were lower in the presence of organic co-solvents, decreasing in the sequence 1,2-dichloroethane > nitromethane > ethanol > hexane > acetonitrile. It is proposed that the oxodiperoxo complex [MoO(O2)2(BPM)] (2) may be the active catalyst formed in situ by oxidative decarbonylation of 1, since crystals of 2 suitable for structure determination by X-ray diffraction were obtained from the reaction solution recovered after a catalytic run at 55 C with cis-cyclooctene as substrate. In support of this hypothesis, the catalytic performance of 2 for the epoxidation of cyclooctene at 55 C is very similar to that for 1.
- Host−guest complexes of cyclopentadienyl iron dicarbonyl (CpFe(CO)2) CO-releasing molecules with Cucurbit[7]urilPublication . Monteiro, Rodrigo P.; Calhau, Isabel B.; Gomes, Ana C.; Mendes, Ricardo F.; Paz, Filipe A. Almeida; D. Lopes, André; Silva, José Paulo da; Romão, Carlos C.; Gonçalves, Isabel S.; Pillinger, MartynIron(II) cyclopentadienyl carbonyl complexes are promising as CO-releasing molecules (CORMs) for therapeutic applications. In common with other metallodrugs, the practical application of Fe-CORMs may require their conjugation with biocompatible carriers to improve their bioavailability and protect them from premature degradation. Here, we show that the CO-releasing properties of the complexes [CpFe(CO)2Cl] (1) and [CpFe(CO)2CH2CONH2] (2) are retained when noncovalently encapsulated within cucurbit[7]uril (CB7), a well-established drug-enhancing excipient. The inclusion compounds were characterized in the solid-state by single-crystal and powder XRD, ATR-IR spectroscopy, Raman spectroscopy, TGA, and 13C{1H} CP MAS NMR. In the crystal structure of 2@CB7, there are two crystallographically independent [2@CB7] binary complexes that differ in the orientation of the guest molecules inside the CB cavity. High-resolution ESI-MS and 1H NMR studies verified the formation and stability of 1:1 2@CB7 inclusion complexes in an aqueous solution. In a physiological buffer, complex 2 is stable in the dark, but releases ca. 1.4 equiv of CO when irradiated with low-power cold white light, with a half-life (t 1/2) of 19.2 +/- 1.9 min. The photodecarbonylation behavior of the complexes is largely maintained in the inclusion compounds, with t 1/2 of 10.0 +/- 0.6 and 21.1 +/- 1.9 min for encapsulated 1 and 2.
- A Molybdenum(VI) Complex of 5-(2-pyridyl-1-oxide)tetrazole: synthesis, structure, and transformation into a MoO3-Based hybrid catalyst for the epoxidation of Bio-OlefinsPublication . Nunes, Martinique S.; Gomes, Diana M.; Gomes, Ana C.; Neves, Patrícia; Mendes, Ricardo F.; Paz, Filipe A. Almeida; Lopes, Andre D.; Pillinger, Martyn; Valente, Anabela A.; Gonçalves, Isabel S.The discovery of heterogeneous catalysts synthesized in easy, sustainable ways for the valorization of olefins derived from renewable biomass is attractive from environmental, sustainability, and economic viewpoints. Here, an organic–inorganic hybrid catalyst formulated as [MoO3 (Hpto)]·H2O (2), where Hpto = 5-(2-pyridyl-1-oxide)tetrazole, was prepared by a hydrolysis– condensation reaction of the complex [MoO2Cl2 (Hpto)]·THF (1). The characterization of 1 and 2 by FT-IR and Raman spectroscopies, as well as 13C solid-state NMR, suggests that the bidentate N,O-coordination of Hpto in 1 (forming a six-membered chelate ring, confirmed by X-ray crystallography) is maintained in 2, with the ligand coordinated to a molybdenum oxide substructure. Catalytic studies suggested that 2 is a rare case of a molybdenum oxide/organic hybrid that acts as a stable solid catalyst for olefin epoxidation with tert-butyl hydroperoxide. The catalyst was effective for converting biobased olefins, namely fatty acid methyl esters (methyl oleate, methyl linoleate, methyl linolenate, and methyl ricinoleate) and the terpene limonene, leading predominantly to the corresponding epoxide products with yields in the range of 85–100% after 24 h at 70 ◦C. The versatility of catalyst 2 was shown by its effectiveness for the oxidation of sulfides into sulfoxides and sulfones, at 35 ◦C (quantitative yield of sulfoxide plus sulfone, at 24 h; sulfone yields in the range of 77–86%). To the best of our knowledge, 2 is the first molybdenum catalyst reported for methyl linolenate epoxidation, and the first of the family [MoO3 (L)x] studied for methyl ricinoleate epoxidation.