Repository logo
 

Search Results

Now showing 1 - 9 of 9
  • Total ion chromatogram and total ion mass spectrum as alternative tools for detection and discrimination (A review)
    Publication . Barea-Sepúlveda, Marta; Duarte, Hugo; Aliaño-González, María José; Romano, Anabela; Medronho, Bruno
    Gas chromatography (GC) and mass spectrometry (MS) are widely used techniques in the analysis of complex mixtures due to their various advantages, such as high selectivity, reproducibility, precision, and sensitivity. However, the data processing is often complex and time-consuming and requires a great deal of experience, which might be a serious drawback in certain areas, such as quality control, or regarding research in the field of medicine or forensic sciences, where time plays a crucial role. For these reasons, some authors have proposed the use of alternative data processing approaches, such as the total ion chromatogram or total mass spectrum, allowing these techniques to be treated as sensors where each retention time or ratio m/z acts as a sensor collecting total intensities. In this way, the main advantages associated with both techniques are maintained, but the outcomes from the analysis can be reached in a faster, simpler, and an almost automated way. In this review, the main features of the GC- and MS-based analysis methodologies and the ways in which to apply them are highlighted. Moreover, their implementation in different fields, such as agri-food, forensics, environmental sciences, or medicine is discussed, highlighting important advantages as well as limitations.
  • On the valorization of Arbutus unedo L. Pomace: Polyphenol extraction and development of novel functional cookies
    Publication . Duarte, Hugo; Carrera, Ceferino; Aliaño-González, M.J.; Gutiérrez-Escobar, Rocío; Jiménez-Hierro, María Jesús; Palma, Miguel; Galego, Ludovina; Romano, Anabela; Medronho, Bruno
    The fruits of Arbutus unedo L. have a crimson colour and are enriched with remarkable concentrations of bioactive compounds such as anthocyanins and polyphenols. These fruits are commonly used in the production of a Portuguese Protected Geographical Indication distillate called “Aguardente de Medronho”. During this process, a solid pomace is generated and presently discarded without valuable applications. In this work, two strategies have been developed for the valorisation of A. unedo pomace. The first approach considers the extraction of polyphenols from this by-product through the optimization of an ultrasound-assisted method using a Box-Behnken design coupled with response surface methodology. The results indicate that the temperature and the percentage of methanol, along with their interaction, significantly influence the total concentration of polyphenols and the antioxidant activity of the extracts obtained. The optimal conditions identified consider the extraction of 0.5 g of sample with 20 mL of a solvent containing 74% MeOH (aq), at a pH of 4.8, maintained at 70 ◦C for 15 min. On the other hand, the second valorisation strategy considered the use of A. unedo pomace in the development of functional cookies. The incorporation of 15–20% pomace in the cookie formulation was well-received by consumers. This incorporation results in an intake of ca. 6.55 mg of polyphenols per gram of cookie consumed, accompanied by an antioxidant activity of 4.54 mg Trolox equivalents per gram of cookie consumed. Overall, these results encourage the employment of A. unedo pomace either as a reliable source of extracts enriched in polyphenols or as a nutraceutical active ingredient in functional cookies, thereby positively impacting human health.
  • Engineering novel phenolic foams with lignin extracted from pine wood residues via a new levulinic-acid assisted process
    Publication . Melro, Elodie; Duarte, Hugo; Antunes, Filipe E.; Valente, Artur J.M.; Romano, Anabela; Norgren, Magnus; Medronho, Bruno
    Phenolic foams are typically produced from phenolic resins, using phenol and formaldehyde precursors. Therefore, common phenolic foams are non-sustainable, comprising growing environmental, health, and economic concerns. In this work, lignin extracted from pine wood residues using a "green" levulinic acid-based solvent, was used to partially substitute non-sustainable phenol. The novel engineered foams were systematically compared to foams composed of different types of commercially available technical lignins. Different features were analyzed, such as foam density, microstructure (electron microscopy), surface hydrophilicity (contact angle), chemical grafting (infrared spectroscopy) and mechanical and thermal features. Overall, it was observed that up to 30 wt% of phenol can be substituted by the new type of lignin, without compromising the foam properties. This work provides a new insights on the development of novel lignin-based foams as a very promising sustainable and renewable alternative to petrol-based counterparts.
  • Poly(butylene succinate)-based composites with technical and extracted lignins from wood residues
    Publication . Melro, Elodie; Duarte, Hugo; Eivazi, Alireza; Costa, Carolina; Faleiro, Maria Leonor; Rosa Da Costa, Ana; Antunes, Filipe E.; Valente, Artur J. M.; Romano, Anabela; Norgren, Magnus; Medronho, Bruno
    Poly(butylene succinate) (PBS) has been drawing attention as a reliable biodegradable and sustainable alternative to synthetic petroleum-based polymers. In this study, PBS-lignin composites were developed using a recently extracted lignin (LA-lignin) from pine wood residues employing an innovative sustainable approach. These composites were systematically compared with PBS-based composites formed with commonly used technical lignins. The molecular weight of the lignins was evaluated, along with various structural and performance-related properties. The LA-lignin/PBS composites display a remarkably low water solubility (ca. < 2%), water uptake (ca. 100 degrees). Moreover, the rigidity and thermal stability of the LA-lignin-PBS composites were higher than those of the systems formed with technical lignins. Although all composites studied present remarkable antioxidant features, the novel LA-lignin-PBS systems stand out in terms of antiadhesion activity against both Gram-positive and Gram-negative bacteria. Overall, the systematic analysis performed in this work regarding the impact of various lignins on the formed PBS composites enables a better understanding of the essential structural and compositional lignin features for achieving biobased materials with superior properties.
  • On the development of Phenol-Formaldehyde resins using a new type of lignin extracted from pine wood with a Levulinic-Acid based solvent
    Publication . Melro, Elodie; Antunes, Filipe E.; Valente, Artur J. M.; Duarte, Hugo; Romano, A.; Medronho, Bruno
    Resole resins have many applications, especially for foam production. However, the use of phenol, a key ingredient in resoles, has serious environmental and economic disadvantages. In this work, lignin extracted from pine wood using a “green” solvent, levulinic acid, was used to partially replace the non-sustainable phenol. The physicochemical properties of this novel resin were compared with resins composed of different types of commercial lignins. All resins were optimized to keep their free formaldehyde content below 1 wt%, by carefully adjusting the pH of the mixture. Substitution of phenol with lignin generally increases the viscosity of the resins, which is further increased with the lignin mass fraction. The addition of lignin decreases the kinetics of gelification of the resin. The type and amount of lignin also affect the thermal stability of the resins. It was possible to obtain resins with higher thermal stability than the standard phenol-formaldehyde resins without lignin. This work provides new insights regarding the development of lignin-based resoles as a very promising sustainable alternative to petrol-based resins.
  • Ultrasound-assisted extraction of Polyphenols from maritime pine residues with deep eutectic solvents
    Publication . Duarte, Hugo; Gomes, Valentim; Aliaño-González, María José; Faleiro, Maria Leonor; Romano, Anabela; Medronho, Bruno
    Deep eutectic solvents represent an important alternative in the field of green solvents due to their low volatility, non-toxicity, and low synthesis cost. In the present investigation, we propose the production of enriched polyphenolic extracts from maritime pine forest residues via an ultrasound-assisted approach. A Box–Behnken experimental design with a response surface methodology was used with six variables to be optimized: solid-to-solvent ratio, water percentage, temperature and time of extraction, amplitude, and catalyst concentration. The mixture of levulinic and formic acids achieved the highest extraction yield of polyphenols from pine needle and bark biomass. In addition, the solid-to-solvent ratio was found to be the only influential variable in the extraction (p-value: 0.0000). The optimal conditions were established as: 0.1 g of sample in 10 mL of LA:FA (70:30%, v/v) with 0% water and 0 M H2SO4 heated to 30 ◦C and extracted during 40 min with an ultrasound amplitude of 80% at 37 kHz. The bioactive properties of polyphenol-enriched extracts have been proven with significant antioxidant (45.90 ± 2.10 and 66.96 ± 2.75 mg Trolox equivalents/g dw) and antimicrobial activities. The possibility to recycle and reuse the solvent was also demonstrated; levulinic acid was successfully recovered from the extracts and reused in novel extractions on pine residues. This research shows an important alternative to obtaining polyphenolenriched extracts from forest residues that are commonly discarded without any clear application, thus opening an important window toward the valorization of such residues.
  • Probing cellulose–solvent interactions with self-diffusion NMR: Onium hydroxide concentration and co-solvent effects
    Publication . Medronho, Bruno; Pereira, Ana; Duarte, Hugo; Gentile, L.; Rosa Da Costa, Ana; Romano, A; Olsson, U.
    The molecular self-diffusion coefficients were accessed, for the first time, in solutions of microcrystalline cel-lulose, dissolved in 30 wt% and 55 wt% aqueous tetrabutylammonium hydroxide, TBAH (aq), and in mixtures of 40 wt% TBAH (aq) with an organic co-solvent, dimethylsulfoxide (DMSO), through pulsed field gradient stim-ulated echo NMR measurements. A two-state model was applied to estimate alpha (i.e., average number of ions that "bind" to each anhydroglucose unit) and Pb (i.e., fraction of "bound" molecules of DMSO, TBAH or H2O to cellulose) parameters. The alpha values suggest that TBA+ ions can bind to cellulose within 0.5 TBA+ to 2.3 TBA+/ AGU. On the other hand, the Pb parameter increases when raising cellulose concentration for TBA+, DMSO and water in all solvent systems. Data suggests that TBAH interacts with the ionized OH groups from cellulose forming a sheath of bulky TBA+ counterions which consequently leads to steric hindrance between cellulose chains.
  • Sustainable extraction of polyphenols from vine shoots using deep eutectic solvents: influence of the solvent, vitis sp., and extraction technique
    Publication . Duarte, Hugo; Aliaño-González, María José; Cantos-Villar, Emma; Faleiro, Leonor; Romano, Anabela; Medronho, Bruno
    Vine shoots are the main by-products of grapevine pruning with no added value. In the present study, deep eutectic solvents (DESs) were used as alternatives to traditional chemical solvents, for the extraction of phyto chemicals from grapevine shoots. Three levulinic acid-based DESs were tested for the first time, and their per formance was compared to methanol (a standard chemical solvent) regarding the extraction of phenolic compounds from thirteen Vitis sp. shoots. Two extraction methods have been applied: ultrasound-assisted extraction and solid-liquid extraction. A total of eleven polyphenols which belongs to four families (proantho cyanins, stilbenes, hydroxycinnamic acids, and flavonols) have been identified and quantified in the extracts. The statistical analysis shows that the levulinic acid-based DES systems are novel and important alternatives to chemical solvents due to favourable eco-friendly properties and remarkable extraction performance of poly phenols. On the other hand, the ultrasound-assisted extraction technique has significantly increased the extraction rate in comparison to the solid-liquid extraction method with p-values lower than 0.05 for most compounds. The genetic factor has been shown to play an important role in the content of extracted polyphenols, being V. riparia pubescente the one that presented the highest concentrations of extracted polyphenols. Finally, the polyphenol-enriched extracts have proven important properties such as antioxidant activity and significant delay in bacteria growth against both gram-positive and gram-negative bacteria. It is important to note that, to the best of our knowledge, this is the first time that deep eutectic solvents have been used for the extraction of bioactive compounds from vine shoot residues.
  • Advancements in detection and mitigation strategies for Petroleum-Derived contaminants in aquatic environments: a comprehensive review
    Publication . Duarte, Hugo; Aliaño González, María José; Medronho, Bruno
    The exponential increase in the production and transportation of petroleum-derived products observed in recent years has been driven by the escalating demand for energy, textiles, plastic-based materials, and other goods derived from petroleum. Consequently, there has been a corresponding rise in spills of these petroleum derivatives, particularly in water sources utilized for transportation or, occasionally, illegally utilized for tank cleaning or industrial equipment maintenance. Numerous researchers have proposed highly effective techniques for detecting these products, aiming to facilitate their cleanup or containment and thereby minimize environmental pollution. However, many of these techniques rely on the identification of individual compounds, which presents significant drawbacks, including complexity of handling, subjectivity, lengthy analysis times, infeasibility for in situ analysis, and high costs. In response, there has been a notable surge in the utilization of sensors or generalized profiling techniques serving as sensors to generate characteristic fingerprints of these products, thereby circumventing the aforementioned disadvantages. This review comprehensively examines the evolution of techniques employed for detecting petroleum-derived products in water samples, along with their associated advantages and disadvantages. Furthermore, the review examines current perspectives on methods for the removal and/or containment of these products from water sources, to minimize their environmental impact and the associated health repercussions on living organisms and ecosystems.